Water Pressure Boost - WPB750 - Industrial Use

Boost Your Home’s Water Pressure — Instantly.

Tired of low flow from your shower, kitchen tap, or garden hose? The Water Pressure Boost is a simple, effective solution designed to increase mains water pressure throughout your home.

For Domestic Potable Water Supplies

The Water Pressure Boost (WPB) all-in-one system is a simple domestic unit designed to increase the water pressure across multiple outlets and floors in cold water mains-fed systems.

All-in-one system

• WPB systems are supplied in three models, WPB600, WPB750 or WPB900, with the only difference being the run time. Each delivers 3.0 Bar and up to 125lpm at a head of 45m.
• The WPB system can be used to improve shower and tap water pressure (both hot and cold) when used with either a combination or unvented cylinder.
• Simply install by branching the mains feed through the WPB system and fitting stop valves on the original line and WPB line to isolate the unit 
  when required, keeping mains flow uninterrupted.
• The unit can be installed in just a few minutes and can revolutionise your showering experience and do away with those slow-filling baths and sinks.
• Each WPB system is fitted with a 7” submersible electronic multi-impellor pump, which will need to be connected to an appropriate electrical supply.
• Easy to install, fast to fit and instant results will not disappoint anyone who has had to live with dripping showers and varying pressure across multiple rooms and floors as the mains pressure struggles to cope.

KEY FEATURES

• Low cost all-in one solution
• Can be fitted in minutes and our simple installation requires 
  no additional programming
• Instant results, the system will be transformed as soon as the unit 
  is fitted and filled
• Integrated non-return valve and protection against water-hammer
• Premium, intelligent pump matches incoming flow to continue to 
  provide water even when the system water level is low
• Integrated dry-running protection with timed automatic restart 
  minimises intervention
• Includes WRAS-approved fittings where in contact with potable water
• For use up to Fluid Category 2
• AG Type Air Gap

SPECIFICATIONS

• Inlet:  ½” BSP
• Outlet:  ¾” BSP
• Overflow:  1¼” / 32mm Waste Pipe
• Drain:  22mm Push-Fit
• WPB750 Dimensions (Vessel) - 780mm (Diameter) x 950mm (Height)
  *Please note - WPB750 does not fit through a standard doorway
  
• WPB750 NOMINAL VOLUME RANGE = 265 - 275 Litres
  

TECHNICAL INFORMATION

• For use with wholesome water
• Maximum flow rate of 125 lpm at a head height of 45m
• 110mm Minimum suction depth
• 35mm Minimum water level
• Maximum water temperature of 50°C
• 2.4 bar cut in pressure
• Pump diameter = 185mm
• Pump impeller: Technopolymer / AISI 304 stainless steel
• 60 starts per hour
• Non-stop service
• IP68 protection
• F-class pump motor protection
• 230v 50Hz power input
• 15m power cable
• 2 year warranty

DOWNLOADS

Technical Data